Liquid Freezer III Pro 360 A-RGB (White) - CPU Water Cooler

€91,99 EUR

~~€137,99 EUR~~ €91,99 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Quantity

Product Description

The video shows the product in use.The video guides you through the product setup.The video shows the product being unboxed.

Quieter and more powerful at low speeds, power reserves under load - for maximum cooling performance without compromise.

Optimized contact pressure distribution for extended CPU lifespan and more efficient heat transfer.

Pre-installed, pre-wired fans and animated instructions for easy setup.

Better heat dissipation and larger liquid volume reduce heat buildup and allow efficient management of temperature peaks.

Check dimensions

Please note that the Liquid Freezer requires a minimum clearance of 63 mm for mounting.
Offset Mounting

Better performance for Intel and AMD CPUs

Shifts the cold plate to the CPU's hotspot and ensures more efficient heat transfer.
Two control modes

Full Control or Simple Control

Control pump, VRM, and radiator fans separately or via PWM signal with all-in-one cable.
60 mm Fan in CPU Block

Active cooling in the socket area

Reduces voltage converter temperature and ensures stable performance.

Fan cables integrated into the sleeve simplify installation and minimize the required wiring.

Standardized 3-pin connector for increased compatibility and control. Daisy-chaining and Gen 2 LEDs enable individual LED colors.

Apply MX-6 in a cross pattern - the water pump's cold plate distributes the paste evenly.

Reinforced EPDM hose with braided cover for maximum durability.

General Specifications	Thermal paste: MX-6 (0.8 g); Warranty: 6 years; Ambient operating temperature: 0-40 °C; Pump: 800-2800 rpm (PWM controlled); Current \| Voltage: 0.35 A \| 12 V DC; Cold Plate: copper, Micro-Skived-Fins; Tube length: 450 mm; Tube diameter: outer: 12.4 mm, inner: 6.0 mm
Compatibility	Intel: LGA1851, LGA1700; AMD: AM5, AM4
Radiator	Material: Aluminum; Dimensions: 398 (L) x 120 (W) x 38 (H) mm
VRM Module	VRM fan: 400–2500 rpm (PWM controlled); Current \| Voltage: 0.05 A \| 12 V DC
Radiator Fan	General: 3x P12 Pro A-RGB; Speed: 400-3000 rpm; Airflow: 77 cfm \| 131 m³/h³/h; Static pressure: 6.9 mmH₂O; Bearing: Hydrodynamic sleeve bearing; Current \| Voltage: 0.33 A \| 12 V DC; Connection: 4-pin fan connector
RGB Specifications	LEDs: 12x A-RGB Gen1 LEDs; Current \| Voltage: 0.40 A \| 5 V DC; Connector: 3-pin A-RGB male + 3-pin female
Size & weight	398 (L) x 120 (W) x 66 (H) mm; weight: 1945 g

CONTACT FRAME FOR INTEL LGA1851 | LGA1700: Optimized contact pressure distribution for extended CPU lifespan and better heat dissipation.
ARCTIC P12 PRO FAN: More power at every speed - more powerful and quieter than the P12, especially at low speeds. Higher maximum speed for optimal cooling performance under high load.
NATIVE OFFSET MOUNTING FOR INTEL AND AMD: Shifting the cold plate center to the CPU's hotspot ensures more efficient heat transfer.
INTEGRATED VRM FAN: PWM-controlled fan that reduces the temperature of voltage converters for reliable performance.
INTEGRATED CABLE MANAGEMENT: The radiator fan's PWM cables are integrated into the hose sleeving, allowing only one visible cable to connect to the motherboard.